10 Instruction Manual
The first-time users may need some time to get familiar with the operation. However, the
user friendly interface of the instrument makes the operation quite easy and simple. Before
long, the user will configure the instrument with very little key pressing, since the interface
allows the user to go to the desired operation directly without any extra steps.
The following tips will facilitate the operation of this instrument.
(1) W hen the window display is between M00 to M09, press a number key x , the user will
go directly to the M0x window. For example, if the current window displays M01, press 7
and the user will go to M07.
(2) W hen the window display is under M00 to M09, press the ENT key and the user will go
to
M90; press ENT key to return. Press the dot key to go to M11
(3) W hen the window display is under M25, press ENT key to go to M01.
2.6 Transducers Mounting Allocation
The first step in the installation process is the selection of an optimum location in order to
obtain a more accurate measurement. For this to be completed effectively, a basic
knowledge about the piping and its plumbing system would be advisable.
An optimum location would be defined as a straight pipe length full of liquid that is to be
measured. The piping can be in vertical or horizontal position. The following table shows
optimum installing positions:
