Flotronic F 500 series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 70

1.0 GENERAL
These instructions must always be kept close to the product’s operating location or directly with the
product.
These instructions are intended to facilitate familiarisation with the product and its permitted use to
help satisfy ATEX safety requirements. The instructions may not have taken into account local
regulations; ensure such regulations are observed by all, including those installing the product.
Always co-ordinate repair activity with operations personnel, and follow all plant safety requirements and
applicable safety and health/law regulations.
These instructions should be read prior to installing, operating, using and maintaining the equipment
in any region worldwide and in conjunction with the main user instructions provided. The equipment must
not be put into service until all the conditions relating to safety instructions have been met.
1.1 DIRECTIVE 2014/34/EU
It is a legal requirement that machinery and equipment put into service within certain regions of the
world shall conform with the applicable CE Marking Directives for Equipment for Potentially Explosive
Atmospheres (ATEX).
Where applicable the Directive covers important safety aspects relating to the equipment, its use
and the satisfactory provision of technical documents. Where applicable this document incorporates
information relevant to these Directives. To establish if the product itself is CE marked for a Potentially
Explosive Atmosphere check the nameplate and the Certification provided.
1.2 Disclaimer
Information in these User Instructions is believed to be reliable. In spite of all the efforts of Flotronic
Pumps Ltd to provide sound and all necessary information, the content of this Manual may appear
insufficient and is not guaranteed by Flotronic Pumps Ltd as to its completeness or accuracy.
1.3 Personnel qualifications and training
All personnel involved in the operation, installation, inspection and maintenance of the unit must be
qualified to carry out the work involved. If the personnel in question do not already possess the necessary
knowledge and skill, appropriate training and instruction must be provided. If required the operator may
commission the manufacturer/supplier to provide applicable training.
6-1
ATEX Safety Manual