Flotronic F 500 series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 47 / 70

44
F Series ‘K’ Style
Chemflo All PTFE
The temporary supporting nuts can be removed to allow the body to locate in the lower housing
carefully aligning the suction port on the suction body register collar. Note the body may not locate fully
at this stage due to the suction seat plugs standing proud. Apply grease to the domed hexagon bolt
heads on the delivery plugs and replace the upper housing carefully engaging the delivery body register
collar into the delivery port. Replace the six clamp bolts and nuts and tighten down gradually and evenly
to the torque stated in Section 8. As a visual check at this stage, the housing grip bars should clamp
the body side support plates with no gaps.
Re-assemble the suction and delivery connection sleeves into the housing ensuring replacement of the
‘O’ rings. Note that the suction sleeve is shorter and marked ‘BOT’, the delivery sleeve being longer
marked ‘TOP’, inserting the large ‘O’ rings into the body apertures. Carefully align the seat plug dowel
and push the assembly home through the ‘O’ ring, giving a gentle tap on the dome head hexagon of
the spring retaining bolt if necessary to ensure full engagement. The dismantling tool may be used in the
slot provided to aid orientation of the plug. Note that the plug will stand slightly proud due to the new
‘O’ ring not having been compressed.
CHANGING DIVIDER SEALS
New divider seals should be fitted to the body before replacement. (Two are fitted). See F Series 500 Style
pumps, Section 11 for full details.