9
L100235 - Autojet & Multimax Owner’s manual | Copyright© Pentair Australia Pty Ltd 2017
9. Electrical
The pump is supplied with a interconnection appliance coupler and standard
Australian 10 Ampere plug and cord. Connection to the power supply is a matter
of inserting the plug into the suitable socket outlet. Before plugging the power
supply cord into the socket outlet, connect the pump to it using the provided IEC
appliance connectors on the end of the interconnection cords. Ensuring there are
no water traces on the connectors push them firmly into each other to ensure
intended splash (water) proof protection. This connection shall be separated
again only for service purpose and only after the power supply is removed by
unplugging the cord from the socket outlet.
The socket outlet shall be in a dry and flood free location; preferably do not use
extension cords for this very reason and because they can cause voltage drop.
Supply voltage outside limits specified in Model Data
can cause motor to overheat leading to overload
tripping, reduced component life or seriously damage
pump and voids warranty.
We recommend, for additional protection, the pump to
be supplied from socket outlet protected by a residual
current device – RCD (also known as an Earth Leakage
Circuit breaker – ELCB) with a maximum rated residual
current of 30mA.
WARNING
Hazardous voltage.
Can shock, burn, or
cause death.
Fig.1 Priming Plug
