Flotec Autojet60 Скачать руководство пользователя страница 10

Страница: 10 / 16

Operation

1. Start-up / Operation

Ensure you have primed the pump correctly. (Instructions on priming the pump

can be found in the installation section under Point 8. Priming Pump).

The MM Series pump is not self-priming and must be primed prior to use.

The AJ Series pumps are self priming therefore it is possible to start them

without filing the suction pipe with water. However it is still necessary to fill the

pump body. The priming operation requires a few minutes and it may also be

necessary to fill the pump body with water several times (accordingly to length

and diameter of the suction pipe).

Note: If the pump is not used for a long period of time, repeat the priming

procedure before start up.

Start the pump and check rotation of the motor. It rotates in a clockwise direction

when viewing the fan through the cowl behind the motor.

2. Protection switch

The AJ & MM Series of pumps have a built in thermal protection switch. The

pumps stops if an overload condition occurs. The motor restarts atomatically

after it has cooled down (see point 3 on trouble shooting section for information

on causes and corrective actions).

Содержание Autojet60
















