15
GB/IE
Push the point of the ground spike into soft earth. Never use
force.
Push the open end of the ground spike in the device‘s ground
spike holder
11
.
Point the device, so that the motion sensor
5
is pointed to-
wards the area you wish to monitor. Make sure that the area
you wish to monitor is not blocked by objects, such as trees or
garden furniture.
Installation on a wall using a screw/peg
Use the enclosed peg
17
(Ø 6 mm) and the screw
16
to install
the device on a wall. This installation material is intended for a
normal wall. If the wall you wish to install the device on has a
different consistency, check with a specialist to find out which
material is suitable for installation on your wall.
Ensure the screw
16
is a maximum of 1.5 m above the ground.
Allow the screw to protrude approx. 1 cm from the wall and
use the loop
7
to hang the device on the screw.
Operation
The device has two adjustment options:
