16 GB/IE
Adjusting the motion sensor
The sensitivity of the sensor can be adjusted using the sensitivity
controller
2
. This affects the range and the size of the animal that
can be detected:
To detect small animals the size of a rodent (e.g. mice) turn the
sensitivity controller to the „max.“ position. The range for detecting
small animals like these is approx. 2 m.
If you only want to detect larger animals (e.g. dogs or foxes) and
not smaller animals, turn the sensitivity controller anticlockwise to-
ward the „min.“ mark. The motion sensor‘s
5
range for detecting
large animals is approx. 2 m.
Adjusting the signal frequency
The device has 5 different programmes to repel animals.
Programme 0 The device is switched off. The charging
function using the solar panel
10
or the USB
charging cable
13
is activated.
Programme 1 13.5 kHz–17.5 kHz (against rodents like
mice or rats)
Programme 2 15.5 kHz–19.5 kHz (against dogs and foxes)
Programme 3 19.5 kHz–23.5 kHz (against dogs, cats and
birds)
