background image

23

GB IE

postage paid.

You can avoid paying extra for bulk post-

age or increased shipping costs by dis-

mantling the bar and chain, and packing 

them together with the motor block in the 

rear part of the original box. Cut off the 

thinner front part, making sure that the 

box keeps its rectangular form, and care-

fully seal up the box on this side.

The sender carries the costs of postage 

and packing.

Caution:

 Please, in no case, send defec-

tive devices with filled oil tank. Completely 

empty the tank. Possible material dam-

ages (oil runs out if device is placed on its 

side or upside down!) and/or fire damages 

during transport are borne at the expense 

of the sender.

Devices sent in with freight collect - by 

bulk freight, express or with other spe-

cial freight - are not accepted.

 

If you have a justified guarantee claim, 

please contact our service centre by tele-

phone, which will then advise you on how 

the claim will be processed.

We will dispose of tools free of charge.

Guarantee

This unit has a guarantee period of 36 

months, or 12 months for units used on a 

commercial basis or for replacement units 

according to the statutory regulations.

Damages, which can be attributed to 

natural wear, overloading or inappropriate 

use, are excluded from the guarantee. 

Certain component parts are subject to a 

normal wear and are excluded from the 

guarantee. In particular, these include: 

Saw chain, chain bar, sprocket chain 

wheel and carbon brushes, provided that 

the complaints cannot be attributed to 

flaws in the materials themselves. Also, 

all damage to the machine, the saw chain 

and the chain bar, which can be attributed 

to inadequate lubrication, are excluded 

from the guarantee. 

Furthermore, a condition of the guarantee 

services is that the maintenance intervals, 

indicated in the operating instruction, have 

been adhered to and the instructions on 

the cleaning, care and maintenance have 

been followed. Damages, which originate 

due to material or manufacturer faults, 

will be repaired free of charge by replace-

ment delivery or repair. This is conditional 

on the saw being returned to the dealer 

complete with purchase receipt and proof 

of guarantee. Unqualified attempts at re-

pairing the unit or dismantling/opening the 

motor casing result in loss of guarantee.

This is conditional upon the device being 

returned in one piece complete with proof 

of purchase and guarantee to our service 

centre (see address on p. 29). 

Our Service-Center will also carry out any 

non-guarantee repair work for a charge. 

We will be happy to give you a quote.

We will only work on units that have been 

sent in with the appropriate packaging, 

Содержание FKS 2200 B1































Отзывы: