FLORABEST FKS 2200 B1 Скачать руководство пользователя

Страница: 5 / 30

GB IE

Technical Data .................................... 24

CE Declaration of Conformity ........... 26

Exploded Drawing .............................. 28

Grizzly Service-Center ........................29

Before first using the machine,

please read this instruction manual

carefully, for your own safety and

for the safety of others. Keep the

manual in a safe place and pass

it on to any subsequent owner to

ensure that the information con-

tained therein is available at all

times. Failure to adhere to the safety

instructions and directions may result

in electric shock, fire, and/or serious

injury.

Intended purpose

The electric chainsaw is constructed for

sawing wood only. The saw is not de-

signed for any other types of application

(e.g. cutting of brickwork, plastic or food).

The chainsaw is designed for employment

in the do-it-yourselfer sector. It was not

designed for continuous employment in

the commercial sector.

The device is designed for use by adults.

Young people over 16 years old may use

the chainsaw under supervision only. The

manufacturer is not liable for damages,

which were caused through use in appli-

cations for which it was not designed, or

incorrect operation.

Notes on safety

This section deals with the basic safety

regulations while working with the electric

chainsaw.

Content

Intended purpose ..................................5

Notes on safety ......................................5

Symbols used in the instructions .......6

Symbols used on the saw .................6

General notes on safety ....................7

Causes and operator prevention

of kickback ......................................10

General description .............................11

Function description ........................11

Overview .........................................11

Safety functions ...............................11

Operation startup ................................12

Tensioning the saw chain ................12

Chain lubrication .............................12

Operating the chainsaw ......................13

Switching on ....................................13

Checking the chain brake ...............13

Checking the oil automatic system ..14

Changing the saw bar .....................14

Fitting the saw chain .......................14

Sawing techniques ..............................15

General ...........................................15

Bucking ...........................................15

Limbing ...........................................16

Felling trees .....................................16

Maintenance and cleaning ...................18

Cleaning ..........................................18

Maintenance Interval Table .............18

Maintenance intervals .....................19

Oiling the saw chain ........................19

Sharpening the saw chain ................19

Adjusting the chain tension .............20

Trouble shooting .................................21

Maintaining the chain bar ................22

Starting up a new saw chain ...........22

Waste disposal and environmental

protection .............................................22

Guarantee .............................................23

Spare parts ...........................................24

Содержание FKS 2200 B1































Результаты поиска

Содержание FKS 2200 B1

Отзывы:

Похожие инструкции для FKS 2200 B1

Бренды по названию

Популярные бренды

FLORABEST FKS 2200 B1, Руководство по эксплуатации

Результаты поиска

Содержание FKS 2200 B1

Отзывы:

Похожие инструкции для FKS 2200 B1

Бренды по названию

Популярные бренды