2001H Series Peristaltic Pump O&M Manual
5. Align marks on tubing with outside edge of the tubing
Clamp.
6. Reinstall collet screw firmly.
7. Tighten tubing seal clamp screw. Be sure to tighten
firmly to prevent “tubing walk.” Tubing walk can occur
when the tubing seal is the wrong size or is not
sufficiently tight to keep the rollers from pulling the
tubing through the pump as it rotates.
Flomotion Systems, Inc. 2001H Series
Pg. 14
Align the tubing marks
with the outside edge
of the Hose Seal.
Tubing seal size
varies with the
selected tubing size.
See tables on
following pages for
details
Mark an 11 inch
length of tubing
and locate the
marks at the
outside edge of
the tubing seal
(see arrows)
