PLUMBING INSTALLATION
Select a cabinet large enough to accommodate the 5 gallon (19L) bottle and suction wand assembly. Place the
Pump Module on the floor of the cabinet with on/off switch and suction tube facing out toward the cabinet doors.
Position as close as possible to a grounded electrical outlet and place the five gallon bottle close to the Pump
Module without kinking the suction hose.
The Bottled Water Dispensing System may also be placed in a pantry, closet, cellar or other location where a
grounded electrical outlet is available.
PLUMBING
5
Line to Refrigerator
Ice/Water Dispenser
Bottled Water
Bottled Water
Pump Module
Coffee
Maker
Bottled Water
Dispensing System
Insert suction hose
port fitting into pump
module “IN” port and
slide locking port clip
in place.
DC plug/connector
into pump module
“DC IN” port.
Insert 1/4” discharge
hose into port fitting
all the way in.
Insert discharge port fitting
into pump module “OUT”
port and slide port clip in
place.
Insert float sensor switch
plug/connector into
pump module “FLOAT”
port.
