FLIR VS290-00, Руководство пользователя

Страница: 18 / 50

Battery Charging and Use
5
This kit is supplied with two high capacity batteries, a stand-alone two-bay
charger, and an AC adaptor. To charge batteries, place them in the charger,
connect the charger bay to the AC adaptor, and then plug the adaptor into an
AC receptacle. The LED indicators on the charger flash while a battery is
charging and glow steadily when fully charged. It may require up to 2 hours
for a full charge if a battery is completely drained.
Once charged, place a charged battery into the battery compartment and long
press the power button
to power the instrument. If an error message ap-
pears informing that the battery voltage is low, charge the battery immediately.
Figure 5.1 Installing and removing a battery.
#NAS100060; r. AB/80750/80750; en-US 12