FLIR PTU-D300, Руководство пользователя

Страница: 16 / 66

PTU ‐ D300 E Series User Manual
10
3.2 – Installation Components
A complete PTU ‐ D300 system configuration requires the following components:

PTU ‐ D300 unit (1)

Payload mating connector kit – for pass ‐
through models only – (2)

PTU ‐ D300 User’s Manual (this document;
not shown)

Pan ‐ Tilt Command Reference Manual (not
shown)

Payload mounting brackets (D300AC ‐ BKT ‐
LSTD) – Optional – (3)

Breakout cable (PTU ‐ CAB ‐ E ‐ 25BO) –
Optional – (4)

RS ‐ 232 to RS ‐ 485 converter (PTU ‐ CONV ‐
RS485C) – Optional – (5)

AC/DC power supply (PTU ‐ AC ‐ APS ‐ 30V) –
Optional – (6)
3.3 – Basic Setup
To perform a basic PTU ‐ D300 setup and installation:
1. Mount the PTU ‐ D300 securely to a lab bench,
tripod, or other stable platform. Verify that there
is enough clearance around the unit. See Section
4.1 for detailed mounting instructions.
2. Attach either the optional breakout cable or
customer ‐ supplied cable to the 32 ‐ pin connector
at the base of the PTU ‐ D300 by inserting the
connector as keyed and then twisting to secure
the connection.
CAUTION: DISCONNECTING THE CABLE WHILE THE PTU ‐ D300 IS POWERED ON CAN
DAMAGE THE UNIT. ALWAYS POWER DOWN THE PTU ‐ D300 BEFORE
DISCONNECTING THE CABLE.
1
2
3
4
5
6