FLIR mariner, Руководство оператора

Страница: 26 / 48

5 – Options and Accessories
20 11/06 427-0010-00-10, version 120
5.2 Dual Control Selector Mounting
Mount the dual control selector switch unit near the primary joystick
control (the maximum cable length available between the switch and the
joystick unit is about 15
″
, and the existing cable from the camera must be
able to reach the control selector switch unit).
Step 1 Cut a 1-1/2
″
diameter hole for the switch unit.
Step 2 Route the existing camera cable to the switch unit.
Step 3 Route the secondary control cable (and extensions if needed) from
the switch unit to the secondary joystick control location.
Step 4 Insert the dual control selector switch panel through the mounting
hole and attach connectors to the mating connectors.
Step 5 Use bedding compound or sealant to waterproof the switch panel.
Step 6 Secure the switch unit with the self-tapping screws provided.
Figure 5-2: Dual Control Selector Mounting Template