FLIR mariner, Руководство оператора

Страница: 13 / 48

427-0010-00-10, version 120 11/06 7
3
3 – Getting Started
Figure 3-2 defines the configuration for installations using one monitoring
station. Power is supplied to the Joystick Control Unit (JCU) and the
system is turned on and manipulated from this station. Locate the JCU in
an ergonomic position near the customer provided display. The JCU has a
small footprint and will accommodate a variety of installation
configurations. For most navigation needs, the ThermoVision
®
Mariner
pan/tilt head will face forward, and won’t be adjusted very often. But for
some applications, such as sport fishing, law enforcement, surveillance, or
fire fighting, extra consideration should be given to placement based on
the application and deck layouts.
The main sensor cable that links the JCU and the monitor is terminated on
both ends, but the installer is required to terminate the power cable at the
power source (ideally the fuse panel). This is the only electrical
termination required for a single monitor configuration.