FLIR M3100 SERIES Скачать руководство пользователя страница 73

Страница: 73 / 178

Using the Main Menu

To configure other display settings:

1. From the Main Menu, click

and then click

Setting>Display>Display

2. Configure the following:

•

Transparency

: Select the menu transparency.

•

Time Display

: Check to show the time on the monitor.

•

Channel Display

: Check to show the channel names on the monitor.

•

Image Enhance

: Check for the system to digitally improve the video quality on the

live display. This setting does not affect recordings.

3. Click

to save changes.

15.3.20

Saving Your System Configuration to a USB Flash Drive

The system allows you to save your current system configuration to a USB flash drive (not
included). This is useful if you want to backup your current settings.

Note

This function only saves settings created in system menus. It does not save or backup any video.

To save your system configuration to a USB flash drive:

1. Insert a USB flash drive (not included) into one of the USB ports.

2. From the Main Menu, click

and then click

Setting>Config Backup

3. Under

Device Name

, select the USB device where you would like to save the

configuration.

4. Click

EXPORT

to save your current system configuration.

#LX400028; r. 1.0/16141/16141; en-US

Содержание M3100 SERIES



















































































































































































Результаты поиска

Содержание M3100 SERIES

Отзывы:

Бренды по названию

Популярные бренды

FLIR M3100 SERIES, Инструкция по эксплуатации

Результаты поиска

Содержание M3100 SERIES

Отзывы:

Бренды по названию

Популярные бренды