FLIR M3100 SERIES Скачать руководство пользователя

Страница: 166 / 178

M3100 Series Hard Drive

Installation

The system comes with a pre-installed 3.5" SATA hard drive. You can replace the hard
drive with one up to a maximum size of 4TB.

21.1

Installing a Hard Drive

CAUTION

Make sure that the system is OFF and the power adapter is disconnected before removing/installing the
hard drive.

To install the hard drive:

1. Insert hard drive screws (4x) on the hard drive and tighten them half way.

2. Power off the system, and unplug all cabling from the system.
3. Remove the rear panel screws (4x) and side panel screws (1x on each side). Remove

the cover.

4. Place the hard drive over the screw slots on the bottom of the system and then slide

the hard drive into place. The SATA connectors on the hard drive should face the right
side of the unit if looking at it from the rear.

5. Connect the SATA power and data cable to the hard drive.

#LX400028; r. 1.0/16141/16141; en-US

156

Содержание M3100 SERIES



















































































































































































Результаты поиска

Содержание M3100 SERIES

Отзывы:

Похожие инструкции для M3100 SERIES

Бренды по названию

Популярные бренды

FLIR M3100 SERIES, Инструкция по эксплуатации

Результаты поиска

Содержание M3100 SERIES

Отзывы:

Похожие инструкции для M3100 SERIES

Бренды по названию

Популярные бренды