FLIR M3100 SERIES Скачать руководство пользователя

Страница: 167 / 178

M3100 Series Hard Drive Installation

6. Turn the system over carefully. Tighten the hard drive screws (4x) to secure the hard

drive.

CAUTION

Hold the hard drive in place when turning the system over to prevent damage to the system.

7. Replace the cover and cover screws (6x).

Note

After installation, you must format the hard drive in order to use it with the system. See 21.3

Format-

ting Hard Drives

, page 158.

21.2

Removing the Hard Drive

CAUTION

Make sure that the system is OFF and ALL power adapters have been disconnected before removing/in-
stalling the hard drive.

1. Power off the system, and unplug all cabling from the system.
2. Remove the rear panel screws (4x) and side panel screws (1x on each side). Remove

the cover.

3. Turn the system over and loosen the hard drive screws (4x), but do not remove them.

#LX400028; r. 1.0/16141/16141; en-US

157

Содержание M3100 SERIES



















































































































































































Результаты поиска

Содержание M3100 SERIES

Отзывы:

Похожие инструкции для M3100 SERIES

Бренды по названию

Популярные бренды

FLIR M3100 SERIES, Инструкция по эксплуатации

Результаты поиска

Содержание M3100 SERIES

Отзывы:

Похожие инструкции для M3100 SERIES

Бренды по названию

Популярные бренды