FLIR M3100 SERIES, Инструкция по эксплуатации

Страница: 164 / 178

Connecting a PTZ Camera (M3100 Series) 20
5. Click Add Preset .
6. Repeat steps 4 and 5 to add additional presets to the tour.
Note
Click Del Tour to clear all presets from a tour.
To run a tour:
• Under No. , select the number of the tour you would like to go to and click .
20.2.3 Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click to open the aux menu.
2. Click the Pattern tab.
3. Under Pattern , enter the pattern you would like to configure.
4. Move the camera into the desired start position and click Begin .
5. Move the camera into the desired end position and click End .
To run a pattern:
• Under No. , select the number of the pattern you would like to go to and click .
20.2.4 Auto Scan
An auto scan automatically cycles between a left and right point.
To create a new auto scan:
1. Click to open the aux menu.
2. Click the Border tab.
3. Move the camera into the desired left position and click Left .
#LX400028; r. 1.0/16141/16141; en-US
154