FLIR M-Series, Руководство оператора

Страница: 56 / 64

Network Settings
58 432-0003-00-10 rev 140 M-Series Operator’s Manual
Network Settings
IP Addresses
By default, the camera and JCU device are configured to automatically
determine IP addresses dynamically through UPnP. It is also possible to con-
figure static IP addresses to coincide with addresses on an existing net-
work.
Note : On the JCU, the IP address is displayed by pressing the COLOR but-
ton and Puck at the same time. The IP is displayed for 3 seconds and then
returns to the Camera name it had prior or the state it was in before the IP
request was made.
Note : it is not possible to display the camera’s IP address on the JCU dis-
play.
When the Network Settings link is selected, the camera IP address, Mask,
and Gateway are displayed, as show in the screen shot below. The Dynamic
option is selected by default.