FLIR HM-224b Pro, Руководство оператора

Страница: 25 / 42

HM-Series Operator’s Manual 3—Operating Your HM-Series Camera
432-0004-31-10, Revision 100 19
White/Black Hot/Instalert Button
Use this button to toggle between the two video and the four
Instalert modes. In the default White Hot mode, hotter
objects appear as white or light grey. In the Black Hot mode,
hotter objects appear as black or dark grey. In the Instalert™ modes
the hottest objects in the scene are highlighted in red to simplify
detection of animals, people, and objects. There are four pre-set levels
of Instalert that you can select based on the specific scene being
viewed. All of the Instalert modes are based on the white hot video
mode.
While white hot is the most commonly used and visually intuitive
method of viewing thermal imagery; black hot can often enhance
contrast of certain objects or provide better visual perspective in
some conditions.
When switching between modes, the appropriate icon is displayed for
approximately 3 seconds.
Display Brightness Button
Use this button to cycle through the five levels of display
brightness. Each press of the button advances to the next
level of brightness.
When the highest brightness level is reached, subsequent button
presses advance to the next lower brightness levels. When the lowest
brightness level is reached, subsequent button presses advance to
the next higher brightness levels. One of the following icons is
Black hot White hot
Instalert™ 1 – 4
HM_Series_Operators.book Page 19 Friday, January 18, 2013 4:27 PM