FLIR gS125 inverted, Руководство по установке

Страница: 8 / 102

occurs, you may notice a slight degradation in the
performance of the unit, in terms of responsiveness
to user operation.
This is expected behavior, designed to protect the
unit from the adverse effects of excessive heat.
Caution: Mounting surface
requirements
This product is heavy. To prevent potential
damage to the product and / or your
vessel, observe the following BEFORE
installing the product:
• Refer to the weight information provided
in the technical specification for this
product and ensure that the intended
mounting surface is suitable for bearing
the weight.
• If the mounting surface is not suitable
for the product weight, you may need to
reinforce the mounting surface.
• If in doubt, refer to a professional
marine equipment installer for further
guidance.
Caution: Power supply protection
When installing this product ensure the
power source is adequately protected
by means of a suitably-rated fuse or
automatic circuit breaker.
Caution: Care of chart and memory
cards
To avoid irreparable damage to and / or
loss of data from chart and memory cards:
• DO NOT save data or files to a card
containing cartography as the charts
may be overwritten.
• Ensure that chart and memory cards
are fitted the correct way around. DO
NOT try to force a card into position.
• DO NOT use a metallic instrument such
as a screwdriver or pliers to insert or
remove a chart or memory card.
Caution: Ensure card reader door
is securely closed
To prevent water ingress and consequent
damage to the product, ensure that the
card reader door is firmly closed.
Caution: Sun covers
• If your product is supplied with a sun
cover, to protect against the damaging
effects of ultraviolet (UV) light, always
fit the sun cover when the product is
not in use.
• Sun covers must be removed when
travelling at high speed, whether in
water or when the vessel is being
towed.
Caution: Product cleaning
When cleaning products:
• If your product includes a display
screen, do NOT wipe the screen with
a dry cloth, as this could scratch the
screen coating.
• Do NOT use abrasive, or acid or
ammonia based products.
• Do NOT use a jet wash.
Power over Ethernet (PoE)
This product can supply Power over Ethernet (PoE)
to class 1, 2 and 3 devices. The product can output
a maximum of 20 Watts for consumption by PoE
devices.
The PoE class denotes the power range of the PoE
device.
PoE Class Power range Class description
Class 1 0.44 W to 3.84 W Very low power
Class 2 3.84 W to 6.49 W Low power
Class 3
6.49 W to 12.95 W Mid power
Class 0
0.44 W to 12.95 W
-
Note: The product will not provide power to class
4 devices.
The product can power up to 3 devices using
the available network / PoE ports as long as the
combined max power of the PoE devices does not
exceed 20 watts.
When a PoE device is connected it is interrogated to
establish if the device is PoE and if so what class of
device it is. The max power for that class of device
is then assigned to that port (e.g. class 2 = 6.49 W)
and deducted from the remaining power output.
The table below shows acceptable configurations
of PoE devices.
Class 1 (3.84
W) Class 2 (6.49
W)
Class 3 /
Class 0
(12.95 W)
Total power
used
1 3.84 W
2 7.68 W
3 11.52 W
8
gS Series installation instructions