FLIR gS125 inverted, Руководство по установке

Страница: 39 / 102

4.7 Auxiliary alarm connection
The auxiliary alarm can be connected to the Video in
/ Alarm out connector of the multifunction display.
Refer to the Connections overview section to
establish if your MFD has an Alarm out connection.
D12806-3
1
3
4
2
1. Auxiliary alarm
2. MFD
3. Connection — Wires should be connected Black
to Black and Red to Purple
4. Video In / Alarm out cable
The auxiliary alarm to cable connection should be
made using suitable connectors (e.g. crimps). To
prevent damage due to water ingress ensure the
connection is watertight.
4.8 SeaTalk ng® connections
The MFD can connect to a SeaTalk ng® backbone.
SeaTalk ng® can be used to communicate with:
• SeaTalk ng® instruments
• SeaTalk SeaTalk ng® autopilots
• SeaTalk equipment via the optional SeaTalk to
SeaTalk ng® converter
• NMEA 2000 equipment via optional DeviceNet
adaptor cables
Typical SeaTalk ng® system
00
D12176-5
12 V / 24 V dc
1 2
6
9 1 0
8
7
3
4
5
1. SeaTalk ng® instrument
2. SeaTalk ng® pilot control head
3. iTC-5 converter
4. Wind transducer
5. MFD
6. Power supply
7. SeaTalk ng® autopilot
8. iTC-5 converter
9. Depth transducer
10. Speed transducer
For details of SeaTalk ng cabling please refer to
Chapter 10 Spares and accessories .
SeaTalk
ng
power requirements
The SeaTalk ng bus requires a 12 V power supply.
Power may be provided from:
• Raymarine equipment with a regulated 12 V power
supply (for example, a SmartPilot SPX course
computer); or:
Cables and connections 39