FLIR DM284, Быстрый старт

Страница: 4 / 10

FLIR DM284 – DMM QUICK START GUIDE Document Identifier: DM284-QS_DMM-en-US_AC
MODE BUTTON OPERATION
Switch Position MODE button sequence of operation
AC → DC → Hz → °F or °C
ACV → HZ
Resistance → Continuity → Capacitance → Diode
AC → DC
AC → DC → HZ
METER POWER
Set the function switch to any position to switch the meter ON. If LO BATT is displayed, if one of the Low
Battery screens appear (below), if the battery icon appears low , or if the meter does not power on,
replace the four (4) 1.5V ‘AAA’ batteries in the rear compartment. The optional TA04 Rechargeable Li-
Polymer Battery system is available if battery recharging, rather than replacement, is preferred.
The meter enters sleep mode after 10 minutes (default). The time can be set from 1 ~ 10 minutes (or OFF) in
the Multimeter Settings menu. 20 seconds prior to entering APO mode, the meter beeps; at this point, press
any button or turn the Rotary Switch to reset the APO timer.
MENU SYSTEM

Press OK to open the main menu, Use the navigation arrows to step through the menu icons. From left to
right, as shown below, they are: Image Mode, Thermal Settings, VFD, Advanced Menu, and Multimeter
Settings.

Press OK to open a menu item or to set an option ON or OFF. When an option is switched ON, a blue dot
will appear next to the icon. The navigation arrows are sometimes used to select an option.

Use the Cancel/Return button to exit menu levels and to return to the normal display mode.
AUTO/MANUAL RANGE
In Auto range mode, the meter automatically selects the most appropriate measurement scale. In Manual
range mode, the desired range (scale) can be adjusted by the user. Auto range mode is the default mode of
operation. When a new function is selected with the function switch, the starting mode is Auto range and
the indicator is displayed.