FLIR DM166 USER MANUAL Document Identifier: DM166-en-US_AA
7
3. Introduction
Thank you for selecting the FLIR DM166 True RMS Digital MultiMeter with IGM
TM
(Infrared Guided Measurement) Thermal Imaging. The DM166 can measure voltage up
to 600V AC/DC and includes a VFD function (low pass filter). The thermal imager
measures surface temperature, offers adjustable emissivity, and features a laser pointer
and cross hairs for precise targeting. This device is shipped fully tested and calibrated
and, with proper use, will provide years of reliable service.
3.1 Key Features
6000 count 2.4” digital TFT display, 320x240 pixels.
IGM
TM
Infrared imager with selectable color palette, laser pointer, cross hairs targeting, and
adjustable emissivity measures surface temperature
Thermal imager (80x60 pixels) offers a 30:1 distance-to-spot ratio and a 50
o
x 38.6
o
field-of-
view
DMM measures AC/DC Voltage (V, mV), AC/DC Current (A, mA, µA), Frequency, Resistance,
Continuity, Diode, Capacitance, and Type-K Temperature
Built-in non-contact voltage detector (NCV)
Flex Clamp adaptor direct input
Automatic and Manual ranging
Input over-voltage warning (OL)
Input warning when test leads are incorrectly connected to meter
MIN-MAX-AVG memory
Relative offset mode
Variable-frequency drive ‘VFD’ feature (low-pass filter)
Data (Display) Hold
Intelligent Auto Power OFF (APO), customizable
Safety Category Rating: CAT IV-300V, CAT III-600V.
Equipped with batteries, test leads, pouch, and Quick Start booklet.
