109
Appendix C: Connecting Additional External Monitors
Main and Spot Video Outputs (D3316 Only)
On the D3316, connect external monitors to either the
Main
or
Spot
port.
• The Spot port automatically shows channels in Sequence View. It can also be configured to
show 1 channel in full-screen or multiple channels in split-screen.
• The Main port can be used to connect an additional monitor for observation, or to use a BNC
monitor or TV (using a BNC to RCA adapter, not included) to control the DVR. You can press
0
on the remote control three times to switch the mouse and system interface between the
monitor connected to the VGA/HDMI port and the monitor connected to the Main port.
Configuring the Spot Monitor for Full-Screen or Split-Screen (D3316 Only)
By default, a monitor connected to the Spot port automatically shows channels in
Sequence View.
To configure the Spot monitor to show channels in split-screen:
1
Right-click to open the Menu Bar and click the Main Menu button (
).
2
Click
Display
and select the
Output
tab.
3
Under
Video Output
, select
Spot-Out
to configure settings for the monitor connected to Spot.
4
Under
View Setup
, select
Enable
. This lets you select and arrange the channels you want to
show on the screen.
Select Spot-Out
Select Enable
5
Under
View Mode
, select
Single
to show 1 channel in full-screen,
Quarter
to show
4-channels in split-screen, or
Ninth
to show 9-channels in split-screen.
Содержание D3200 Series
Страница 12: ...x ...
