FLI R
ADK
Ge tt in g S ta rt ed
The information contained herein does not contain technology as
defined by EAR,15 CFR772, is publicly available, and therefore
not subject to EAR.
4
shown in the drawing below is the positive lead to the heater.
2.2
Streaming Video on Windows
The camera controller software can be found here
https://www.flir.com/support-center/oem/camera-controller-gui-for-boson/
After the software is installed find the camera comport by opening Device Manager and
listing the available ports. Do this with the camera unplugged and with the camera plugged
into the computer. The port that shows up with the camera plugged in is the camera
’
s
comport.
With the camera
’
s comport known, open the BosonGUI software and select the camera
’
s
comport in the Port selection dropdown in the lower right corner of the BosonGUI
software. To start video streaming just click the start video capture button in the upper
right corner of the BosonGUI software.
3
Ethernet
–
Getting Started
The Ethernet option of the FLIR ADK ships with a GMSL connector on the camera and a GMSL
to Ethernet Bridge that allows users to interact with the FLIR ADK using the standard
GenICam protocol.
Figure 1: The FLIR ADK GMSL option is shown on the left with the GMSL 1 to Ethernet bridge shown on the right.
