Fliegl Noah TTW, Руководство по эксплуатации

Страница: 35 / 68

TTW Noah livestock trailer Preparation and setup
Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
33 of 69
6. Preparation and setup
The following steps must be performed to set up and prepare the machine:
- Establish the hydraulic and compressed air connections
6.1 Compressed air brake system with manual control valve
For every use (driving operation), the brake force must be set according to the
trailer load.
Conditions for operation
- Compressed air brake connection (dual line brake system) on tractor
Selecting the operating mode, adjusting
the trailer load status
Set the loading conditions of the trailer on the
selector lever by turning the handle on the
control valve.

Select from operating mode " Empty ",
" Half load " or " Full load " depending on the
trailer load.
"
Release " operating mode for moving the
uncoupled trailer is triggered via the trailer
release valve.
The button must be pushed in for this
purpose.
When using the trailer brake valve
in combination with a manually
adjustable brake force regulator
without release position, a trailer
release valve is employed.
Fig. 23
:
Manual brake force adjustment
If, when re-coupling the trailer to the towing vehicle, the release valve (button) has
not been manually pulled out to the stop, the supply pressure from the towing vehicle
pushes the button back out.
Half load
Full load
Empty
Trailer release valve button
Selector lever for brake
force regulator