32
②
Relay SMTP is set on ‘Gmail’ as default, but when ‘Default’ (in menu tab) is selected, this will changed
to [email protected].
③
Receiver Email can be set up to 5 users (emails).
④
Email Interval settings are as follows [5 sec / 1 min / 3 min / 5 min /10 min].
(5) Bandwidth
Move to {Menu}
{Setup}
{Network}
{Bandwidth}.
This sets up adjust resolution / quality and transmitting the data by using the network.
Image Resolution
D1
Image Quality
Adjust quality of the image, as the value increases, the
compression rate gets higher and image quality gets low.
However the transmission rate gets higher.
Transmission Codec
JPEC / H.264
４
-
６
-
７
Syste
m
1. NVR Name
Used to name the NVR device.
2. ID For Key Controller
Unique system controller number setting.
3. User Registration
Used to register, add, or delete users.
4. Upgrade
Upgrades the system firmware/system setup
5. Factory Setup
Initialize Setup.(Factory default value, except for the network
value)
6. Console / POS Port
POS or Console Port Setting
7. Alarm
Set the alarm On/Off and alarm format.
8. Alarm Duration
Set the alarm time by continuous/5/10/15/User setting
9. Menu Time Out
Used to set the time for exiting the System Setup menu
automatically and displaying the real-time monitoring screen.
10. Language
System OSD language setting
(1) NVR Name
. The initial value is the Mac address. (It supports up to 20 letters for the system name.)
