Flextool SP118OFT Скачать руководство пользователя

Страница: 24 / 98

page 24 — Sp1 pavement Saw • operation anD partS manual — rev. #0 (01/04/10)

Figure 10 highlights the components of a diamond blade.

Figure 10. Diamond Blade

Drive pin Hole – A commonly located hole on the

diamond blade core that prevents operational blade

slippage between the inner & outer blade flanges

(collars). Inspect the diameter of the hole to ensure

there is no distortion, and that a snug fit develops

between the hole and drive pin.

Stress relief Holes (gullets) – Check the steel core

for cracks that may have propagated from the slots and/

or gullets. Cracks indicate extreme fatigue failure and if

sawing continues, catastrophic failure will occur.

edge of the Steel Core – Check the diameter edge for

discoloration (blue oxidation) indicating an overheating

condition caused by insufficient cooling water/air.

Overheating of blades may lead to loss of core tension

and/or increase the possibility for blade failure. Check

to make sure the steel core’s width is uniform about

the rim of the blade, and not succumbing to an “under

cutting” condition brought about by highly abrasive

material or improper under cutting core protection.

Directional arrow – Check to ensure that the blade is

oriented properly on the spindle for sawing. Reference

the directional arrow on the blade and place it so the

direction of rotation “downcuts” with the turn of the

shaft.

Diamond Segment or rim – Ensure there are no

cracks, dings, or missing portions of the diamond

segment/rim.

Do not

use a blade that is missing

a segment or a portion of the rim. Damaged and/

or missing segments/rims may cause damage to your

saw, and injury to the user or others in the operating

area.

Specifications – Ensure that the blade specifications,

size, and diameter properly match up to the sawing

operation. Wet blades must have water to act as

a coolant. Utilizing a diamond blade not matched

properly to the task may result in poor performance

and/or blade damage.

arbor Hole – It is essential that the arbor hole diameter

properly matches the shaft arbor, and that it is free

from distortions. Correct blade flanges (collars) must

be used. The inside face of the flanges must be clean

& free of debris. An out of round arbor condition will

cause damage to the blade and the saw.

maX rpm – This RPM reference is the maximum safe

operating speed for the blade selected.

never exceed

the max RPM on the diamond blade. Exceeding

the MAX RPM is dangerous, and may cause poor

performance and may damage the blade. All blades

used must be designed for the maximum spindle

RPM.

blades

Содержание SP118OFT



































































































Результаты поиска

Содержание SP118OFT

Отзывы:

Похожие инструкции для SP118OFT

Бренды по названию

Популярные бренды

Flextool SP118OFT, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание SP118OFT

Отзывы:

Похожие инструкции для SP118OFT

Бренды по названию

Популярные бренды