Flextool SP118OFT, Руководство по эксплуатации и запасным частям

Страница: 13 / 98

Sp1 pavement Saw • operation anD partS manual — rev. #0 (01/04/10) — page 13
saFety inFOrMatiOn
liFting SaFetY
Caution
„
never allow any person or animal to stand underneath
the equipment while lifting.
„ Some saws are very heavy and awkward to move around.
Use proper heavy lifting procedures.
„
Do not attempt to lift the saw by the guards, handle
bars or front pointers.
NOTICE
„
The easiest way to lift the saw is to utilize the lifting bale. A
strap or chain can be attached to the lifting bale, allowing
a forklift or crane to lift the saw up onto and off of a slab
of concrete. The strap or chain should have a minimum
of 2,000 pounds (1,000 kg) lifting capacity and the lifting
gear must be capable of lifting at least this amount.
„
Before lifting, make sure that the lifting bale is not
damaged.
„ Use one point suspension hook and lift straight upwards.
LIFTING BALE
„
never tip the engine to extreme angles during lifting as
it may cause oil to gravitate into the cylinder head, making
the engine start diffi cult.
„ Always make sure crane or lifting device has been
properly secured to the lifting bale.
„
Do not lift machine to unnecessary heights.
„
never lift the equipment while the engine is running.
„
alwaYS use ramps capable of supporting the weight of
the saw and the operator to load and unload the saw.
tranSporting SaFetY
NOTICE
„
alwaYS shutdown engine before transporting.
„ Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
„
alwaYS tie down equipment during transport by
securing the equipment with rope.
„
Ensure that the diamond blade does not come into contact
with the ground or surface during transportation.
„
never transport the saw to or from the job site with the
blade mounted.