Flextool SP118OFT Скачать руководство пользователя

Страница: 25 / 98

Sp1 pavement Saw • operation anD partS manual — rev. #0 (01/04/10) — page 25

blades

Diamond Blades

Selecting the diamond blade type and grade defines how

the blade will perform both in cutting speed and blade life.

Selection of the proper diamond blade consists of:

Material to be Cut

Type of Saw Being Used

Horsepower of Saw

Hardness Characteristics of the Material

Performance Expectations

Factors for sawing economy:

Type of Blade

Depth of Cut

Sawing Speed

Characteristics of the Material Being Cut

Blade Speed

warning

Operating saw blades at rotational speeds

greater than those specified by the

manufacture can cause blade damage,

and may injure the user or others in the

operating area.

A diamond blade’s performance is directly connected to

specific peripheral (rim) speeds.
The following shaft rotational speeds have been factory set

to ensure optimum blade performance:

• SP1 457mm Capacity - 2,836 RPM

BlaDe plaCement

Refer to Figure 11 for the following steps.
1.

engine oFF — Set the ENGINE ON/OFF switches to

the

"oFF" position to prevent accidental starting.

Blade guard — Pivot the blade guard front cover all

the way back. The guard tension spring will keep the

front cover in position.

Blade Hex nut — Unscrew the spindle nut (right side

loosens clockwise and tightens counter-clockwise while

the left side loosens counter-clockwise and tightens

clockwise. DO NOT overtighten the nut (approximately

45-50 ft. lb/61-68 N/m) when finalizing the assembly.

warning

Failure to thoroughly inspect the diamond

blade for operational safety could result in

damage to the blades or the saw and may

cause injury to the user or others in the

operating area.

table 5. material listing and Blade Selection

material

Blade

Cured Concrete

Cured Concrete Blade

Green Concrete

Green Concrete Blade

Asphalt

Asphalt Blade

Asphalt over Concrete

Asphalt/Concrete Blade

Block, Brick, Masonry, Refractories

Masonry Blade

Tile, Ceramic, Stone

Tile Blade

Содержание SP118OFT



































































































Результаты поиска

Содержание SP118OFT

Отзывы:

Похожие инструкции для SP118OFT

Бренды по названию

Популярные бренды

Flextool SP118OFT, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание SP118OFT

Отзывы:

Похожие инструкции для SP118OFT

Бренды по названию

Популярные бренды