20
USER MANUAL - WebdynEasy LoRaWAN
Version 0.10
To insert the SIM card into the product, slide the holder flap to the right (in the OPEN
direction). Slide the SIM card into the flap. Then close the flap by sliding it to the left (in the
LOCK direction)
Webdyn does not supply any SIM cards. Please contact an M2M operator that
supports the 3G and LTE-M network.
Please contact your SIM card provider to find out what information to enter to
configuration the modem.
By default, the hub configuration does not request a PIN code (PIN Mode: Off). If you want to
enable the hub PIN code, it is preferable to configure it before the SIM card is installed. (see
section
5.1.1
:
Hub connectivity
)
There are three possibilities:
•
The PIN code is disabled: modem communication is active.
•
The PIN code is enabled and the entered PIN code is correct: modem communication
is active.
•
The PIN code is enabled and the entered PIN code is incorrect: modem communication
is in error.
If the SIM card has an enabled PIN code and it is incorrect the first time the hub is
started , it will be blocked after 3 attempts.
It can be unlocked using a mobile phone using the PUK code provided by the
operator.
4.2.4
LoRa
The hub has a female SMA connector labelled "RF" on the board to connect a radio antenna.
The product is delivered with an internal antenna. An external antenna can be connected to
SIM card
