Flexim PIOX S502ID, Руководство по эксплуатации

Страница: 50 / 64

9 Measurement
9.2 Measuring mode
PIOX S502ID
2020-01-24, UMPIOX_S502IDV1-2EN
50
9.2.2 Display during the measurement
By pressing the following displays will be indicated:
The current fluid temperature is displayed. Press .
Important data of the ongoing measurement are displayed. The quality and precision of the measurement can be evaluated.
• Press
.
Tab. 9.1: Status display and values of the status outputs
display state current output I1 binary output B1 binary output B2
fluid to be detected
present in the pipe
20 mA closed closed
other fluid present in the
pipe
4 mA closed open
no fluid present in the
pipe, but transmitter ready
for operation
4 mA open open
invalid temperature
measurement
4 mA open open
measurement interrupted
or in start-up mode
0 mA open open
no display transmitter de-energized 0 mA open open
57% – signal quality
40.0dB
– SNR
1550 – sound speed in m/s
? NaOH ?
is in pipe
? NaOH ?
not in pipe
? NaOH ?
no Signal
? NaOH ?
no temper. input
>START< specials
Setup + measure
? NaOH ?
Ts= 24.64 C
? NaOH ?
57%40.0dB1550