Flexim FLUXUS F501 Скачать руководство пользователя страница 125

Страница: 125 / 146

18 Settings

FLUXUS F501

18.3 Libraries

125

UMFLUXUS_F501V1-3EN, 2020-06-30

It is possible to set a time period after which the display toggles between the positive and the negative totalizer during the

measurement.
• Enter a time interval between 0 (off) and 5 s.
• Press ENTER.

18.3

Libraries

The internal material database of the transmitter contains parameters for pipe and lining materials as well as for fluids.
The material and fluid scroll list displayed in the program branch

Parameter

can be arranged. Shorter scroll lists make

work more effective.

• Select the menu item

Special Funct.\SYSTEM settings\Libraries

• Press ENTER.

• Select

Material list

to edit the material scroll list or

Medium list

to edit the fluid scroll list.

• Select

go back

to return to the menu item

SYSTEM settings

• Press ENTER.
• Select

factory

if all materials/fluids of the internal database are to be displayed in the scroll list. An already existing

scroll list will not be deleted but only deactivated.

• Select

user

to activate the user defined scroll list.

• Press ENTER.

user

is selected, the material or fluid scroll list can be edited, see section 18.3.1...18.3.3.

• Select

End of Edit

to stop editing.

• Press ENTER.

• Select

yes

to store all changes of the scroll list or

to quit the menu item without storing.

• Press ENTER.

Special Funct.\...\Measuring\Toggle totalizer

Special Funct.\SYSTEM settings\Libraries

Special Funct.\SYSTEM settings\Libraries\Material list

Special Funct.\...\Material list\user\Show list

Special Funct.\...\Material list\user\End of Edit

Special Funct.\...\Material list\user\Save List?

Notice!

If the material/fluid scroll list is quit by pressing key BRK before storing, all changes will be lost.

Содержание FLUXUS F501



















































































































































Результаты поиска

Содержание FLUXUS F501

Отзывы:

Flexim FLUXUS F501, Руководство по эксплуатации, Страница: 125 / 146

Результаты поиска

Содержание FLUXUS F501

Отзывы: