Flexiheat ELIS B-E-100, Руководство пользователя

Страница: 19 / 27

| 19
6. GUIDELINES FOR CONNECTION WITH POWER SUPPLY
•
Before connecting the power supply check the correctness of
controllers connection. These connections should be executed in
accordance with their technical documentation.
•
Before connecting the power supply check whether the mains
voltage is in accordance with the voltage on the device data
shield.
•
Starting the device without connecting the ground conductor is
forbidden.
•
Controleer voordat u de stroomvoorziening aansluit of de
regelingen correct zijn aangesloten. Deze aansluitingen moeten
…..
worden gemaakt in overeenstemming met de technische
….
…...
documentatie.
•
Controleer voordat u de stroomvoorziening aansluit of de
spanning van de netvoeding overeenkomt met de werkspanning
…..
op het typeplaatje op de unit.
•
Het is niet toegestaan om de unit op te starten zonder dat de
aarding aangesloten is.
7. GUIDELINES FOR CONNECTION WITH PIPELINE
•
The connection should be executed in a way which does not induce
. stresses. It is recommended to use flexible pipes to deliver heating
. agent to the exchanger.
•
It is recommended to install vent valves at the highest point of the
. system.
•
The system should be executed so that, in the case of a failure, it
. is possible to disassemble the device. For this purpose it is best to
. use shut-off valves just by the device.
•
The system with the heating medium must be protected against an
. increase of the heating medium pressure above the permissible
. value (1.6 MPa).
•
While screwing exchanger to pipeline - connecting stubs has to be
. hold by wrench.