FlexiForce RS200, Установка, обслуживание, использование

Страница: 2 / 31

RS200 manual GB 2009 www.flexiforce.com
2
manual GB
rev.0 Feb-09
ATTENTION! GENERAL WARNING!
To install, use and maintain this door system safely, a number of precautions
must be taken. For the safety of all concerned, pay heed to the warnings and
instructions given below! If in doubt, contact your supplier.
SPECIAL SAFETY WARNINGS OR REMARKS IN THIS MANUAL ARE INDICATED
WITH THIS SYMBOL. READ THESE WARNINGS CAREFULLY!
9
This manual has been written for use by experienced fitters and as such is not suitable for
d.i.y. purposes or for use by trainee fitters.
9
This manual describes the installation of the hardware set components, door sections
(panels) and refers to installation manuals of the electrical operator. Be sure to
supplement this manual if needed with instructions for any additional components not
described in this manual.
9
Before starting, read this manual carefully!
9
Certain components may be sharp or have jagged edges. As such you are advised to wear
safety gloves.
9
All the components which have been supplied are designed for use with this specific
overhead door. Replacement or adding additional components may have an adverse effect
on the safety of, and the guarantee on, the door. Also the CE-approval which has been
granted to this door will be cancelled when components are changed or installation is not
done according to this manual! Installer is responsible for this.
9
Ensure that there is sufficient light during installation. Remove obstacles and dirt. Make
sure that there is no one else present other than the fitters. Other people (children!) may
get in the way or endanger themselves during the installation.
GUARANTEE, CONDITIONS AND TERMS
The general terms and conditions of delivery and payment issued by the Metaalunie and designated as
METAALUNIE CONDITIONS are fully applicable to all our quotations, contracts and their
implementation. We expressly reject all other terms and conditions. On request we will send you a copy
of these terms and conditions free of charge. A copy may also be downloaded from our website
www.flexiforce.com.
FlexiForce strives to deliver 100 % in conformance with the order. In practice, in spite of all our controls,
this is not always possible. However we will rectify any errors as quickly as possible, in order to minimise
the inconvenience caused to you or the user. As such, it is important that you inform us as soon as possible
about any problem with the delivery (include the order number and week of production) and give us the
opportunity to offer a suitable solution.
FlexiForce will only reimburse third party costs if we have given explicit permission for this in advance. The
reimbursement is based on normal rates and travelling expenses over distances of 1 hour away at most.
For large-scale projects we strongly advise you to first install 1 door completely before installing the other
doors. In this way, any errors can be detected early on and rectified comparatively cheaply.
This manual does not confer any rights. Technical modifications may be made without written notice.
FlexiForce has endeavoured to design and put together this hardware set in conformance with the
applicable CE-norms. However, we recommend to check our configuration against any local national
specification.