Technical Description and Installation Manual
GigaFlex
21
Power:
≤ 0W
Isolation (between contacts & coil):
≥ 00Vdc ( 0us Telcordia)
+3.3Vdc Power Output:
max 100mA
Connector Type:
12 pin Phoenix Mini Combicon MCD 1,5/ 6-G1F-3,81 (female)
6.1.6 USB Host
Specification:
USB V2.0 full and low speed
Data Rate:
12Mbit/s
Protocol:
Master,
Uses the USB Mass Storage device class (MSC) for
communication with external flash drives.
Connector Type:
USB Type A female connector
6.1.7 Monitor or Local Craft Terminal USB Interface
Specification:
USB V2.0 full and low speed
Data Rate:
12Mbit/s
Protocol:
Master/Slave,
Uses the USB communication device class (CDC) drivers
to take advantage of the installed PC RS-232 software to talk over the
USB.
Connector Type:
USB Type mini B female connector
6.1.8 SD Card Slot
Specification:
Micro SD
Type:
Host
Class:
Class 2
6.2
Power over Ethernet (PoE)
Specification:
PSE, IEEE 802.3af (15.4W Output Power)
Power Input:
18
– 72Vdc
Electrical Isolation:
1.5kVac @ 1 min
PoE Voltage:
-56Vdc
PoE Output Power:
15W max
Power Sourcing:
Mode A
Power Polarity:
MDI and MDI-X (jumpers selectable). Make a note when order if MDI-X
is required.
6.3
Power Supply
Specification:
ETSI ETS 300 132-2
Voltage for -24V models:
18
– 72Vdc local power
Max Current:
≤ 2.1A
Power Consumption @ -24V
Max. 18W, GF-RAIL2N-6Eth-2I2O/2SER-24V,V21
(All DSL links up, all interfaces on, Max. 48W, GF-RAIL2N-6Eth-2I2O/2SER-PoE-24V,V25
PoE on (if present)):
Max. 18W, GF-RAIL2N-6Eth-24V,V26
Max. 20W, GF-RAIL4N-6Eth-2I2O/2SER-24V,V31
Max. 50W, GF-RAIL4N-6Eth-2I2O/2SER-PoE-24V,V35
Max. 20W, GF-RAIL4N-6Eth-24V,V36
Max. 20W, GF-RAIL4N-6EthP-2I2O/2SER-24V,V41
Max. 50W, GF-RAIL4N-6EthP-2I2O/2SER-PoE-24V,V45
Max. 20W, GF-RAIL4N-6EthP-24V,V46
Isolation:
≥ . kVdc @ 1min
Connector Type:
4 pin Phoenix Mini Combicon MC 1,5/4-GF-3,81 (female)
