Technical Description and Installation Manual
GigaFlex
15
•
RFC 2453 RIPv2
•
RFC 5798 VRRPv3
•
RFC 3228 OSPF v 2
•
RFC 5340 OSPF v 3
•
RFC 3164 Syslog
•
RFC 2819 RMON1
•
RFC 4502 RMON2
•
IGMP
Detailed configuration examples of selected protocols can be found in the GigaFlex Configuration
Manual.
3.3.2.1 Power Over Ethernet (PoE)
In some GigaFlex models the four 10/100/1000Base-TX Ethernet interfaces (RJ45) can generate
Power over Ethernet (PoE) according standard IEEE 802.3af, Mode A.. The maximum common
power output for all four Ethernet ports is 15 Watts.
Figure 3-9. 802.3af Po
E Mode A combi e’s power o to t e same wires as t e data sig al.
MDI to MDI-X crossover or an external power source for PoE functionality is possible by special
internal jumper settings. Please contact the manufacturer.
3.3.3 Serial Interface
The Serial interface of some GigaFlex models operates according to RS232/422/485 standards.
It transmits serial data over an IP-based Network using TCP or UDP messages. Point-to-Point
and Point-to-Multipoint topologies are supported.
The Serial interface has the following features:
•
Rates: 150, 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 56000,
57600, 115200, 230400
•
Number of data bits: 7, 8
•
Number of stop bits:1, 1.5, 2
•
Parity: None, Even, Odd
•
Flow Control (RS232 only): CTS/RTS
Detailed configuration examples can be found in GigaFlex Configuration Manual.
3.3.4 Inputs and Outputs
Some GigaFlex models have 2 Inputs and 2 Outputs.
Input is a pair of contacts, connected to a current detector. If the current is present in the electric
