Technical Description and Installation Manual
GigaFlex
17
4
INSTALLATION
4.1
General Requirements
Before installing the device, read carefully the present manual. Take care about all warnings
inside this manual. Please note that the warrantee and free-of-charge repair will not be granted if
the device failed due to one of the following conditions:
a) Misuse and improper installation, including but not limited to:
-
installation and use of the product in a conflicting way with the actual technical or safety
standards in the country where it is installed;
-
co ectio to t e power source t at do ’t matc t e requirements for power input
source;
-
installation and operation in an environment that exceed defined climatic conditions of
the device.
b) Maintenance or repair performed by unauthorized service centers or persons.
c) Accidents, lighting strokes, flooding, water, fire, mud and dust, improper ventilation,
voltage drops and peaks, excessive moisture, excessive electro-magnetic impacts or
insects or any creatures have been penetrated the device causing its malfunction, as well
as other reasons laying beyond the manufacturer control and
do ’t correspo ding with
defined technical specification.
d) Improper transportation.
e) Defects of the system, where the device was integrated.
It is strictly prohibited:
a) to alter, remove or make illegible the serial number of the device;
b) to adapt, adjust or change the device in order to improve or to extend its functionality
without prior written consent of the manufacturer.
4.2
Unpacking the Unit
Before unpacking, check if the packaging is intact and if the model matches the purchase order
or contract.
Unpack the unit and make a visual inspection.
Write down model and serial number for internal records.
4.3
Mounting on DIN-rail
The GigaFlex models should be mounted on DIN-rail. The Figure 4-1 shows mounting options.
Figure 4-1. DIN-rail mounting options.
D
S
L
SD
FD
V
D
C
E
t
e
r
e
t
RS
V
V
IO
DSL
SD
FD
VDC
Et er et
RS
V V
IO
