REV.000
705 Commerce Drive, Wapakoneta, OH 45895 | www.flexmachinetools.com | 1-800-837-2503
ATTACHING AN VERTICAL GRINDER (101100-101400)
1. The rotational gimbal should come attached to the arm as shown below, if the tool has been provided
to FlexArm it will come already mounted.
2. For typical horizontal grinders, FlexArm will attach the mount plate between the four housing bolts on the
tool. FlexArm will provide longer bolts and spacers to accommodate this.
3. First the tool’s current housing bolts need to be removed. Once they are removed the spacers can be
added between the housing and the mount plate then the longer housing bolts can be used to secure
everything back together.
4. Once the mount plate is securely attached to the tool, the tool can be inserted through the gimbal ring and
bolted to it using the four mount screws.
Note: Each tool varies, in some cases the clamp plates will have to be completely removed before
the gimbal can be slid over the tool. Please contact a FlexArm specialist with any questions.
4 of 12
B-19 WITH ROTATIONAL GIMBAL
Rev.000
ATTACHING A VERTICAL GRINDER (101100-101400)
1.
The rotational gimbal should come attached to the arm as shown below, if the tool has been provided
to FlexArm it will come already mounted.
2.
For typical horizontal grinders, FlexArm will attach the mount plate between the four housing bolts on
the tool. FlexArm will provide longer bolts and spacers to accommodate this.
3.
First the tool’s current housing bolts need to be removed. Once they are removed the spacers can be
added between the housing and the mount plate then the longer housing bolts can be used to secure
everything back together.
4.
Once the mount plate is securely attached to the tool, the tool can be inserted through the gimbal ring
and bolted to it using the four mount screws.
Note: Each tool varies, in some cases the clamp plates will be used to attach to the tool housing instead of a
mount plate. Please contact a FlexArm specialist with any questions.
