Flex VCE 33 M AC, Руководство пользователя

Страница: 19 / 284

– 4

DANGER
No dusts hazardous to health should be
sucked in during wet vacuuming.
Illustration
 Properly insert the connection socket in
the suction connection.
 Push in the connection socket until it
locks into place.
 Turn the suction connection with the
connection socket to the right to close it
tightly.
Note: The accurate fit is ensured by means
of a "bayonet connection".
Illustration
 Release and remove the suction head.
 Pull the paper filter bag out towards the
back.
 Pull up the locking slide and tightly
close the paper filter bag upon removal.
 Dispose of the used paper filter bag in
the closed, dust-proof bag in accord-
ance with legal requirements.
 Insert and lock the suction head.
– When vacuuming up wet dirt, the paper
filter bag must always be removed.
Illustration
 Release and remove the suction head.
 Pull the disposal bag up.
 Pull the opening of the disposal bag out
toward the back over the suction sup-
port and seal it tightly.
 Tightly seal the disposal bag with clo-
sure strips underneath the opening.
 Remove the disposal bag.
 Dispose of the used disposal bag ac-
cording to the local provisions.
 Insert and lock the suction head.
– To vacuum wet dirt, always remove the
disposal bag.
– If wet dirt is vacuumed with the uphol-
stery or crevice nozzle (option) or if wa-
ter is sucked up from a container it is
recommended to deactivate the "auto-
matic filter dedusting" function.
– If the maximum liquid level is reached
the appliance will turn off automatically.
– In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
– After completion of the wet vacuuming:
Clean the flat pleated filter using the fil-
ter dedusting unit and allow the filter to
dry sufficiently. Clean the electrodes
using a brush. Clean the container with
a damp rag and dry it.
Illustration
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.
 Plug in the mains plug.
 Switch on the appliance at the main
switch.
 Set the suction output (min - max) at the
rotary switch.
Wet vacuum cleaning
Close the suction connection
Removing the paper filter bag
Removing the disposal bag
General
Clip connection
Operation
Turning on the Appliance
Adjust the suction output
19 EN