Flex S 44 L AC, Оригинальная инструкция по эксплуатации, Страница: 27 / 32

*) Optional accessories / Option depending on model
Original instruction
13
D
GB
F
NL
I
N
S
DK
SF
E
P
GR
TR
SLO
HR
SK
CZ
PL
H
RO
BG
RUS
EST
LV
LT
FLEX VCE 33 L MC / VCE 33 L AC / VCE 44 L AC / S 44 L AC
4. In no circumstances should the power supply
cord be wrapped around fingers or any part of
the operators person.
2.2 Hazardous dust
WARNING
Hazardous materials.
Vacuuming up hazardous materials can lead
to serious or even fatal injuries.
1. The following materials must not be picked up
by the machine:
– hot materials (burning cigarettes, hot ash,
etc.)
– flammable, explosive, aggressive liquids
(e.g. petrol, solvents, acids, alkalis, etc.)
– flammable, explosive dust (e.g. magnesium
or aluminium dust, etc.)
2.3 Spare parts and accessories
CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or func-
tion of the appliance.
1. Only use original spare parts and accessories
from Flex. Spare parts that can affect health and
safety of the operator and or function of the ap-
pliance, are specified below:
Description Order No.
Flat filter PTFE, 1 pcs. 445.118
Fleece filter bag, 5 pcs. 445.088
Disposal bag, 5 pcs. 445.061
Long Life filter bag, 1 pcs. 445.517
Motor cooling air filter PET, 1 pcs. 445.134
2.4 In explosive or inflammable atmosphere
CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced by the
presence of volatile liquid or inflammable gas or va-
pour.
3 Control / Operation
CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains voltage.
1. Ensure that the voltage shown on the rating plate
corresponds to the voltage of the local mains
power supply.
3.1 Starting and operating of the machine
Check that the electrical switch is switched off (in
position 0).
Check that suitable filters are installed in the ma-
chine.
1. Check that the electrical switch is switched off
(in position 0).
2. Check that suitable filters are installed in the
machine.
3. Connect the suction hose into the suction inlet at
the machine by pushing the hose forward until it
fits firmly in place at the inlet.
4. Connect the tubes with the hose handle, twist
the tubes in order to ensure that they are prop-
erly fitted.
5. Attach suitable nozzle to the tube. Choose noz-
zle depending on what type of material that is to
be picked-up. If used for dust extraction in con-
nection with dust producing tool then connect
end of suction hose with appropriate adapter.
6. Connect the plug into a proper electrical outlet.
7. Put the electrical switch into position I in order to
start the motor.
Turn I:
Activate the machine
Turn clockwise for suction power
control
Turn 0:
Stop the machine
Turn :
Activate Auto-On/Off operation
Turn counterclockwise for suction
power control