Flex innovations 6S RawPower MAMBA 10 G2, Инструкция по эксплуатации

Страница: 7 / 24

6
HORIZONTAL STABILIZER INSTALLATION
Required Tools and Fasteners : #1 Phillips Screwdriver, Needle Nose pliers, Clear Tape (4 strips)
1. Insert the horizontal stabilizer tube into the fuselage and roughly center.
2. Slide the left and right stabilizer halves onto the tube. Ensure that the control horn orients towards the belly of the airplane and that the
elevator joiner tabs are properly indexed. Do not force the stabilizer into place .
3. Apply 4 pieces of clear tape to the joint between the stabilizer and the plastic mounts. Be sure to apply tape to both the top and bottom.
4. Disassemble the ball link from the elevator pushrod and re-assemble it in the inside hole of the elevator control horn (do not use thread locker).