Flex innovations 6S RawPower MAMBA 10 G2, Инструкция по эксплуатации

Страница: 20 / 24

19
REPLACING AILERON SERVOS
Required Tools and Fasteners: #1 Phillips Screwdriver
1. Unplug the servo from the receiver.
2. Unscrew the servo arm from the servo and remove the servo arm.
3. Unscrew the two mounting screws located at each end of the servo and remove.
TIP: Plug a spare extension lead into the servo when removing to make it easier to route the lead of the
replacement servo when installing it.
SERVICING THE POWER SYSTEM
Required Tools and Fasteners: #2 Phillips Screwdriver, 13mm box wrench
1. Remove the propeller and spinner assembly from the motor.
2. Remove the (4) bolts holding the motor to the firewall using a #1 Phillips screwdriver. Disconnect the motor from the ESC.
3. To remove the ESC, simply unplug its lead from the receiver or Aura and the output leads from the motor.