Fleurette FLEURETTE 2016, Руководство пользователя

Страница: 13 / 32

PAGE 11
ALDE heater
A control panel is placed near the cell control
pane. It allows you to configure the various
settings. (Refer to ALDEmanual)
The expansion tank is located in the wardrobe.
The fluid level should be checked regularly.
Note: fill up to the "high" to limit the flow noise of
the heat transfer fluid (automotive coolant) in the
expansion tank. This noise can be further
reduced by decreasing the speed of the
circulator. This is adjustable in the control panel
settings (see instructions ALDE)
Warning :
The air exchange grids have to be kepted
cleaned and not obstructed while the gas heater
is working. In case of non-compliance with this
instruction, the CO2 rate could increase and
cause an accident.
The air intake and exhaust ducts of the burnt
gas and the chimney have to be always opened
and clean.
Do not spray water on the chimneys.
The vents must be opened and no objects
should prevent warm air circulation.