Fleurette FLEURETTE 2016, Руководство пользователя

Страница: 12 / 32

PAGE 10
Heating system
The boiler is placed inside the motorhome under
the seat or under the bed.
It is powered by gas and 220V depending on
model. The Truma heating system is optimum for
distribution of warm air through four warm air
outlets. The Alde central heating system is a
hydronic system, with the same heating principle
as in most of our homes.
They are used both for heating and hot water
production.
TRUMA heater
The Truma control panel is located near the main
control panel to select the different modes. (See
specific instructions)
ALDE heater
This boiler is powered by gas and electricity
(220V).
The heat source comprises an LPG boiler with a
230-volt immersion heater, which heats a liquid
mixture consisting of water and glycol. Hot glycol
water circulates around the system through
radiators and pipes by means of a pump. The
pump speed is set to 1.
The heat is spread through the various grids
placed across the cell.
An air blower located under the seat allows to
accelerate the temperature rise in the cell. It can
be controlled on the heating control panel
An interchange with the vehicle engine cooling
system is installed to recover heat when the latter
is in operation.
A stop valve allows to stop this function during the
hot season. It is located in the engine on the right
side behind the beam. The circuit is stopped when
the stop lever is perpendicular to the pipe
Stop valve