Fleurette FLEURETTE 2016, Руководство пользователя

Страница: 10 / 32

Water supply
A switch on the control panel activates the
water supply pressure.
(See instructions on the control panel in the
white bag)
The pump sends water (see Nordelettronica
instructions in the white bag) to the sink in the
kitchen, washbasin in the bathroom, the shower
and WC. Before opening a tap, make sure there
is water in the water tank. If not used for a
while, the pump works automatically to maintain
pressure in the system.
The absence of water in the tank may damage
the pump.
The boiler must be full to get hot water. Start the
pump and open the hot water taps to actuate
the valve to release the air. (Heating time=
roughly 30mn)
The metallic filter should be cleaned at the
beginning and end of each season.
To disassemble, purge the water system,
unscrew the bell under the filter and get it out.
Go on tightening the bell by hand and check for
leaks.
The expansion tank located under the kitchen or
under the bed or under the seat (according th
the model) should be emptied every year by
draining the water circuit, tap opened , fresh
water tank emptied and clean in FrostControl
drain position (see Truma documentation).
PAGE 8
Water pump
Filter
Turning on the water
Expansion tank