Push extra cycle button until C-24 comes up on screen. Hit up arrow until you get to the
capacity of your system such as 24,000, 32,000, 48,000, 64,000 grain capacity etc...
Push extra cycle button until you get back to the time of day. Reset time to proper time of
day.
Filling your softener with water and purging air from softener:
Turn all faucets off outside and in home. Slowly open bypass valve on 7000SE valve and
let the mineral tank fill with water. When water stops running go to the nearest treated
faucet to the Water Softener, unscrew aerator screen if applicable and turn cold water on
slowly, this will bleed the air from the tank, let the water run until it clears.
If you sized your water softener using our recommendation then you will go through salt or
potassium chloride slowly. Add five gallons of water to brine tank. Add three 40 to 50
pound bags of extra course, pelt salt or potassium chloride to brine tank. The resin is
already charged so initial regeneration is not required.
You are finished.
Congratulations!
Please fill free to email some pictures of you new installation and a letter; we will post it
on our site for other customers to view.
As always we appreciate your business!
Page 7 of 7
Copyright © 2006 Quality Water Treatment, All right reserved. www.qualitywatertreatment.com
