background image

IMPORTANT

READ THESE INSTRUCTIONS CAREFULLY BEFORE BEGINNING THE INSTALLATION. PROPER INSTALLATION
WILL PROVIDE SAFE AND EFFICIENT SERVICE AND AVOID NEEDLESS EXPENSE NOT COVERED BY THE
WARRANTY. READ THE PRODUCT WARRANTY CONTAINED IN THIS MANUAL AND REMEMBER TO FILL
OUT AND RETURN TO THE MANUFACTURER ALL RELEVANT WARRANTY CARDS AND CERTIFICATES.
SHOULD YOU HAVE ANY QUESTIONS, PLEASE CONTACT YOUR LOCAL DEALER OR REFER TO THE

GETTING SERVICE FOR YOUR WATER HEATER

SECTION OF THIS MANUAL.

SAVE THIS MANUAL FOR FUTURE REFERENCES.

RESIDENTIAL OIL-FIRED WATER HEATER 

OWNER’S MANUAL

INSTALLATION AND OPERATING INSTRUCTIONS

If the information in these instructions is
not entirely followed, a fire or explosion
may result causing property damage, per-
sonal injury or death.

DO NOT STORE,

use gasoline or any other

flammable vapours or liquids in the 
vicinity of this or any other appliance.

DO NOT USE

gasoline, crank case oil or

oil containing gasoline.

DO NOT TAMPER

with the unit or 

controls.

DO NOT LEAVE

paper or rags close to the

burner or the water heater.

WHAT TO DO IF YOU DETECT OIL

Immediately call your oil supplier.

Installation and service must be performed by a
qualified installer, service agency or the oil supplier.

WARNING

WARNING

For your records, write the model and serial number here:

Model # ____________________________

Serial #

____________________________

This water heater 

IS NOT

design certified for

installation outdoors.

GI-IM001En-0211

54000006

© 2011  Giant Factories Inc.  Printed in Canada

C          US

ISO 9001

REGISTRED

Содержание RESIDENTIAL OIL-FIRED WATER HEATER



















Отзывы: